Made new radiator support rods to suit the 5 inch air cleaner.
A few modifications to the dash cluster. Had to move the ignition and headlight switch 
Under cowl wiring is all clipped up. It was going to black wrap everything with loom tape but if I have problems down the track I wont be able to find which wire is faulty. I also had to leave some of the dash cluster wire long enough so I can pull the dash cluster out in one piece.
Windscreen frame was Chopped, stripped & painted. Wiper motor was dummied up and converted to tandem wiper arms.
Heat shields fabricated and painted to help prevent burns and melting paint. The trumpets are also wrapped to help keep the heat in.
Rear window garnish mould was chopped 4 inches, paint stripped and painted. Picture was taken in etch primer.
Side window garnish moulds were also cut down.
Seats, seat belts and covered side panels were fitted.
Rear and front tyres cleaned up. Ribbed trims fitted. I have spyder caps that I need to mount to the centres.
Console, shifter, carpets fitted.
Cowl & lower wind screen trim refitted.
No comments:
Post a Comment