2012 Update

I haven't updated this thing for a while...This is what i have done over the last few months.
  • Fitted the steel out bars inside the car
  • Bolted down the front guards
  • Bolted on the running boards
  • Bolted the body to the chassis
  • Modified the original dash to hold switches
  • Fitted up the brake assembly
  • Plumbed the brake lines (Thanks Joe)
  • Fabricated a lower brace for the steering column
  • Repainted the steering column
  • Fabricated a bush for one of the steering shafts
  • Fitted some of the sound / heat proofing to the front of the car


  • Pulled out the diff and four bars and refitted them after I painted them


  • Fitted the exhaust wrap (not the easiest job to do when the pipes are mounted under the car)
  • Fitted the boot lid catch
  • Fitted the boot floor (3 pieces)
  • Modified the fuel tank
  • Fitted the fuel tank and filler neck (Thanks for the polish on the filler neck Matty)
  • Fitted the boot lid (Thanks for polishing the hinges Joe)


  • Fitted the battery kill switch

  • Fitted the battery box
  • Fitted the Nitrous bottle brackets. Still need to plumb the Nitrous set up.


  • Fitted the rear guards, rear indicators, tail lamps & rear exhaust pipes. 







  • Removed the two pack paint from the engine






    • Stripped the engine
    • Repainted the engine


     

    • Fitted the engine and gearbox to car
    • Removed the engine and gearbox from the car after I remembered that I didn't fit the sandwich plate between the engine & gearbox
    • Refitted the engine and gearbox after my stuff up was fixed (Thanks Joe) 
    • And probably a whole heap of little bits and pieces

    No comments:

    Post a Comment